Filament ABS ARANCIONE by TOMAS3D.
Acrylonitrile butadiene styrene or ABS is a thermopolymer obtained by polymerization of butadiene rubber with acrylonitrile and styrene or acrylonitrile / styrene copolymer. It is a very widespread material thanks to its lightness, strength and versatility: it can be either extruded or injection molded. In fact, it guarantees objects that must have rigidity and durability and, compared to PLA, it is less friable, withstands higher temperatures and has a lower friction coefficient (this makes it easily extractable). It has good stiffness and toughness even at low temperatures up to -40 ° C, high hardness, resistance to impacts and scratches. It has excellent electrical resistance. It is optimally usable thermally from -45 to +85 ° C and has self-extinguishing features that can be improved with flame resistant versions. As far as the environment is concerned, they are resistant to water, aqueous salt solutions, diluted acids, alkaline solutions, saturated hydrocarbons, gasoline, mineral oils, animal and vegetable fats, and present a sufficient resistance to aging.
-Abile Printable with heated plate
- Better results are obtained with a better closed chamber if it is insulated or heated
TOMAS3D ARANCIONE PLA filament is made in Italy
|Spool outside diameter: 0mm|
|Spool hole diameter: 50mm|
|Net weight: 0,5kg|
|Gross weight: 0kg|
|Spool width: 90|
|Item number: ABS0182|
|Made in: Italy|
|RAL: 2008||Nozzle temperature : 190° - 220°|
|Plane temperature: 80° - 100°|
|Print speed: 60 - 120|